Give us a sec! Just getting ready.
THE GIST
10 mask filters to insert into your reusable protective face masks
FEATURES
- Contains 10 mask inserts to safeguard you against airborne contaminants
- Designed to protect the wearer from inhaling hazardous particles including fumes, vapors, gases and particulate matters such as dusts and airborne microorganisms
- Quality carbon PM2. 5 filter is made up of 3 non-woven materials—melt-blown fabric, spun-bond fabric, and activated carbon fabric
- Melt-blown fabric is the most important part of a filter and blocks against pollutants, impurities, and particles
HOW TO USE:
• Insert the filter inside the pocket of mask. Cover the mouth and nose and hang the earloops. Adjust the earloops.
• Ensure that the grey side should be facing away from your face.
• Keep in mind, you CANNOT wash them to clean the mask filter. It would only clean surface dust.
• Provided they are stored unopened in the original packaging, filters will last five years from manufacture date. Once removed from their packaging they should be replaced after six months (even if they have not been used).
• You can use them continuously for 6 to 8 hours. When film or sticky sediment stains emerge, please replace the filter.
TIP: Remember to always use proper hand hygiene before inserting. Bring at least 3 with you for replacement, in case of emergency.
SPECIFICATIONS:
WHAT YOU GET: (1) Tame Mask Filter (10 Pcs.)
MATERIALS: Quality carbon PM2. 5 filter made up of 3 non-woven materials: melt-blown fabric, spun-bond fabric, and activated carbon fabric
DIMENSIONS: approximately 12cm x 8cm
THE GIST
10 mask filters to insert into your reusable protective face masks
FEATURES
- Contains 10 mask inserts to safeguard you against airborne contaminants
- Designed to protect the wearer from inhaling hazardous particles including fumes, vapors, gases and particulate matters such as dusts and airborne microorganisms
- Quality carbon PM2. 5 filter is made up of 3 non-woven materials—melt-blown fabric, spun-bond fabric, and activated carbon fabric
- Melt-blown fabric is the most important part of a filter and blocks against pollutants, impurities, and particles
HOW TO USE:
• Insert the filter inside the pocket of mask. Cover the mouth and nose and hang the earloops. Adjust the earloops.
• Ensure that the grey side should be facing away from your face.
• Keep in mind, you CANNOT wash them to clean the mask filter. It would only clean surface dust.
• Provided they are stored unopened in the original packaging, filters will last five years from manufacture date. Once removed from their packaging they should be replaced after six months (even if they have not been used).
• You can use them continuously for 6 to 8 hours. When film or sticky sediment stains emerge, please replace the filter.
TIP: Remember to always use proper hand hygiene before inserting. Bring at least 3 with you for replacement, in case of emergency.
SPECIFICATIONS:
WHAT YOU GET: (1) Tame Mask Filter (10 Pcs.)
MATERIALS: Quality carbon PM2. 5 filter made up of 3 non-woven materials: melt-blown fabric, spun-bond fabric, and activated carbon fabric
DIMENSIONS: approximately 12cm x 8cm
